发表于 2015-7-3 10:29:56
Subject: Re: My new "Ossie motor" is now running well
Date: 30/01/2010 08:11:33 Paris, Madrid
From: Ossie Callanan
I have now confirmed that to make a self runner that WILL run INDEFINITELY on the same battery, you must make your input pulse amplitude and pulse width sit inside the generator pulse such that it is virtually masked and unnoticeable!!! But the motor will STILL RUN!!!
- My motor and any replication motor can run indefinitely once tuned correctly and the coils have enough turns for the magnet strength and RPM such that the generator voltage is equal to the battery voltage.
- Whether you pulse in attraction or repulsion mode does not matter. It works the same.
- Please see my latest video below. Note the waveform across the coils for tuning. You need to make sure the input pulse voltage DOES NOT exceed the generator pulse voltage. You need to get your pulse width to fit almost exactly neatly inside the top of the generator pulse such that you can't even make out the input pulse as it is masked inside the generator pulse. Don't worry, the motor will still run when you do this as long as the input pulse width is wide enough but still within the generator pulse.
- I am reluctant to say that you can get the battery to charge as well, even though I am doing this also, because it is not easy so until I can work out a simple enough arrangement and circuit for others to replicate a battery charging effect also, I will just say that you can run this motor indefinitely on the same battery with what I have presented so far, fairly easily!
I feel this is a huge breakthrough in the understanding of how to tune this motor.
Hopefully this will make it a bit easier for others to replicate...